No Generator RPM’S Rigid Boom

Download PDF

No Generator RPM’S Rigid Boom

1. Operator is seated in seat and box is GREEN
   for SEAT S.
2. PTO spinning at 1000-1100 PTO RPMs (verify
   with tractor engine RPM’s at 2000ish)
3. E-Stop pulled OUT! Check Monitor Screen for
   warning saying “E-Stop pressed”.

4. Press “20 second manual RPM BYPASS” (light
blue box lower left corner).

5. Check for GREEN RPM box and verify GEN RPM
shows 1650 + RPM’s on the LEFT side

If no GEN RPM’s are displayed turn off power for
30 seconds and retry sequence.

Turning off power without keeping it off for a full
30 seconds will not drain the DC STEP UP
TRANSFORMER CAPACITORS and will not reset
the computer!